Firmware-Release 3.3.005

Die Firmware Version 3.3.005 ist nun in "eap" verfügbar, und wird in ca. 7 Tagen in "main" veröffentlicht.

Änderungen in dieser Version:

- Cellular: GPS auto pause on parking option added (power saving).
  New config:
    [modem] gps.parkpause     -- park time in seconds for auto pause, 0 = disabled (default)
- New vehicle: NIU MQi GT EVO or GT 100 electric scooters (NEVO)
  https://docs.openvehicles.com/en/latest/components/vehicle_niu_gtevo/docs/index.html
- Smart EQ 453:
    TPMS pressure alert settings at Features
    add information commads xsq climate|counter|mtdata|reset|start|total
- Nissan Leaf:
    ZE1 inital release
    Fix: Poll state not set to off when charging stopped by OVMS
    Enh: SOH_instrument now float not int to support ZE1 instrument values 
    Enh: Copy v.b.p.temp.max to v.b.temp so that max battery temp displays in app
- Smart EQ 453:
    DDT4all simple support, a full List of commands at www.smart-EMOTION.de
- VW e-Up (OBD): decode & display battery cell level health status & battery module
    health history, provide v.b.capacity (net capacity in kWh)
  New metrics:
    xvu.b.c.soh               -- Array: SOH [%] of each HV battery cell
    xvu.b.hist.soh.mod.   -- Array: SOH [%] history of each battery module (NN=01…14/17)
  New web page:
    /xvu/battsoh          -- Battery pack & cell SOH info
- Smart EQ 453:
    add timebased Pre-heat/cool Control 
      - can set at Website -> Smart ED/EQ 4.Gen -> Climate/Heater 
      - at App Features #4: on = 1 off = 2, #5 time like 05:15 = 515, #6 5/10/15 Minutes = 0/1/2
    add GPS powersaving mode at parking
    add 12V alert raised, the car starts the 12V charging process for 15 Minutes
    add Network type switch, option to lock LTE only. Needed, when the Provider has no Datastream at GSM
- CAN: add error flag decoding (included in can status output)
  New commands:
    can  explain [errorflags]    -- Decode error flags into human readable text 
- DBC Files
  Add unit support
  Add extended signals/multiplexing support
  Add support for enum values.
- OVMS Server v3: Ability to define less frequent MQTT communication to save data charges and power
  Events:
    Excludes clock.* events from being published at the start of every minute.
  New configs:
    [server.v3] events.legacy_topic  -- Whether to publish every event on the legacy /event topic as well as
                                        the MQTT-style topic. Defaults to true to preserve existing behaviour.
                                        Recommended to set to false if you don't use the legacy topic.
    [server.v3] updatetime.keepalive -- Max number of seconds to allow the MQTT connection to be idle before
                                        sending PINGREQ. Should be set slightly shorter than the network's
                                        NAT timeout and the timeout of your MQTT server. If these are unknown
                                        you can use trial and error. Symptoms of keepalive being too high are
                                        a lack of metric updates after a certain point, or "Disconnected from
                                        OVMS Server V3" appearing in the log. In previous releases this used
                                        the Mongoose default of 60. New default value 1740 aligns with
                                        observed Hologram timeout of 1800.
- Metrics
  add new Standard Metrics
    v.b.capacity          -- Main battery usable capacity [kWh]
    v.c.timestamp         -- Date & time of last charge end [DateLocal]
    v.g.timestamp         -- Date & time of last generation end [DateLocal]
- Server V2:
  add to MsgStat
    v.c.kwh.grid          -- Energy drawn from grid during running session [kWh]
    v.c.kwh.grid.total    -- Energy drawn from grid total (life time) [kWh]
    v.c.timestamp         -- Date & time of last charge end [seconds]
    v.b.capacity          -- Main battery usable capacity [kWh]
  add to MsgFirmware
    m.net.mdm.mode        -- Cellular connection mode and status [LTE,Online]
  add to MsgGen
    v.g.timestamp         -- Date & time of last generation end [seconds]
- Vehicle: keep charge time as long as chargeport active
- Vehicle: Implement events and scripting for Auxillary batttery monitor
  New events:
    vehicle.aux.12v.normal
    vehicle.aux.12v.charging
    vehicle.aux.12v.blip
    vehicle.aux.12v.dip
    vehicle.aux.12v.charging.blip
    vehicle.aux.12v.charging.dip
    vehicle.aux.12v.low
  New commands:
    vehicle aux [status]
    vehicle aux monitor [status]
    vehicle aux monitor enable [[low-threshold] [charging-threshold]]
    vehicle aux monitor disable
  Duktape Support:
    OvmsVehicle.AuxMon.Enable
    OvmsVehicle.AuxMon.Disable
    OvmsVehicle.AuxMon.Status
- Cellular: GPS run state signals added.
  New events:
    system.modem.gpsstart       -- GPS has started
    system.modem.gpsstop        -- GPS has stopped
- Cellular: receive & send SMS, forward SMS & USSD to user. Note: no system notification
  support (and not planned), this is primarily meant to forward provider info only
  sent via SMS or USSD or expected to be received via SMS.
  New events:
    system.modem.received.sms
  New notifications:
    [info] modem.received.sms
    [info] modem.received.ussd
  New commands:
    cellular sendsms   […]
- MG:
  Add new vehicle MG4
  Supports Short, Medium and Long Range Variants
- Implement custom CLI commands with Duktape function OvmsCommand.Register()
- Support for *,? wildcards in vfs ls and vfs rls commands.
- Smart EQ 453:
    add 5min Booster preheat cool
    add TPMS pressure
    add Internal Temp
    add Doors status
    add Charging Metrics
    add BMS Temperatures
    add Charging metrics
    add option to change TMPS Sensors position
    add option for IOS users to display TMPS values
- Support for completion in vfs commands.
- Separate Polling from the Vehicle implementation
  New commands:
    poller status
    poller pause
    poller resume
    poller trace on|txrx|all|off|status-- Control verbose logging
    poller times on|off|status|reset   -- Control poller timing metrics
  Duktape Support:
    OvmsPoller.GetPaused
    OvmsPoller.GetUserPaused
    OvmsPoller.Pause
    OvmsPoller.Resume
    OvmsPoller.Trace
    OvmsPoller.GetTraceStatus
    OvmsPoller.Times.Start
    OvmsPoller.Times.Stop
    OvmsPoller.Times.Reset
    OvmsPoller.Times.GetStatus
- Duktape support for Metric Age / Stale
  New Duktape methods
    OvmsMetrics.IsStale
    OmvsMetrics.IsFresh
    OvmsMetrics.Age

Die vollständige Änderungshistorie ist hier abrufbar: changes.txt

Danke an alle beteiligten Open-Source-Unterstützer und -Entwickler!